Greetings, I had, what I thought was a Vanagon flywheel resurfaced. I attached it to engine but alas, the clutch was slightly too big!? What the heck? This one has a pressure plate opening of about 215mm. What is it? It fits the 2.1L crank and has the same bolt hole pattern and inner sealing groove. I thought it might be a 1.9L but no, I see now they use the same 228mm. Any guesses? I had another flywheel that I was sure was a Vanagon so I had to resurface it. Anyway, Bessie is back on the road! Ken Lewis http://neksiwel.20m.com/ Vanagon mods, tech info and O2 sensor help |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.