In a message dated 5/23/07 8:49:54 AM Eastern Daylight Time, theklube@GMAIL.COM writes:
> So I decide if I can take the cover off of the sliding track on the side, > so > I can see what's up. I've removed the two phillips head screws that hold > the cover on from the bottom and I think that's all there is in the way of > fasteners. My problem is how to get the cover off without damaging it. I > have in hand a new length of plastic beading to replace what's there. Is > there a trick to getting the cover off? > > soak the seal with WD40 first.. pull cover away slightly from side of van so the phillips tabs clear the other tabs and use a rubber mallet and a towel..and hit upward.. not too hard of your damage the metal/crack the paint chris
************************************** See what's free at http://www.aol.com. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.