Date:         Thu, 24 May 2007 09:29:30 -0400
Reply-To:     Jonathan Poole <jfpoolio@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jonathan Poole <jfpoolio@GMAIL.COM>
Subject:      Water and Battery LEDs dead - fix
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I have seen the connection of the led bulbs to the circuit board go bad.  To
determine if this is the problem you should only need to gently wiggle the
bulbs and they should light up intermittently.  It could be that the bulb or
bulbs that indicate your current water and battery levels are out though it
is unlikely that they will all be out.  This is easy to fix if you know how
to use a soldering iron (don't overheat the board).

Jonathan Poole
'82 ac westy

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.