I always stick a pick, awl or small screwdriver in and wiggle it open. They can then be re-used by crimping them with end nippers (or the proper tool). Mike B. ----- Original Message ----- From: "Mike Collum" <collum@VERIZON.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, June 03, 2007 7:32 PM Subject: Re: How do I remove these clamps???
>I use large side cutters (wire cutters). > > Mike > > > > Malcolm Stebbins wrote: >> Is there a trick to removing these clamps? >> >> http://picasaweb.google.ca/mstebbins/Vanagon/photo#5071982140890273234 >> >> I guess I could use a hack-saw. FWIW, I do not need to save the hose. >> >> Thanks. Malcolm >> >> >> >> ____________________________________________________________________________________ >> Choose the right car based on your needs. Check out Yahoo! Autos new Car >> Finder tool. >> http://autos.yahoo.com/carfinder/ >> > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.