Date:         Sun, 3 Jun 2007 21:21:41 -0400
Reply-To:     Mike <mbucchino@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike <mbucchino@CHARTER.NET>
Subject:      Re: How do I remove these clamps???
Comments: To: Mike Collum <collum@VERIZON.NET>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

I always stick a pick, awl or small screwdriver in and wiggle it open.  They
can then be re-used by crimping them with end nippers (or the proper tool).

Mike B.

----- Original Message -----
From: "Mike Collum" <collum@VERIZON.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, June 03, 2007 7:32 PM
Subject: Re: How do I remove these clamps???


>I use large side cutters (wire cutters).
>
> Mike
>
>
>
> Malcolm Stebbins wrote:
>> Is there a trick to removing these clamps?
>>
>> http://picasaweb.google.ca/mstebbins/Vanagon/photo#5071982140890273234
>>
>> I guess I could use a hack-saw.  FWIW, I do not need to save the hose.
>>
>> Thanks.   Malcolm
>>
>>
>>
>> ____________________________________________________________________________________
>> Choose the right car based on your needs.  Check out Yahoo! Autos new Car
>> Finder tool.
>> http://autos.yahoo.com/carfinder/
>>
>