Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2007, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 4 Jun 2007 17:13:18 -0700
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Front wheel bearings
Comments: To: mordo <helmut.blong@gmail.com>
In-Reply-To:  <de48c0be0706041224h51f97395g4b01b2f6580cd84f@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Its just tap-tap-tap in a circle to keep it from tilting in the bore; same going back in.

Small hits with a big hammer are better than big hits with a small hammer. And a good solid drift and massive backing make a big difference too.

On 6/4/07, mordo <helmut.blong@gmail.com> wrote: > > Makes sense to me. > > So, is removing the races a simple as it seems to be? any tips and tricks? > I > think I noticed a recent post that mentioned splitting the old race with a > Dremel tool and then using it to seat the new race? > > cheers. > > ---------- Forwarded message ---------- > From: Allen Hill <route66rider@knology.net> > Date: Jun 4, 2007 12:18 PM > Subject: RE: Front wheel bearings > To: mordo <helmut.blong@gmail.com>, vanagon@gerry.vanagon.com > > ALWAYS replace both pieces of the bearing! Did I say ALWAYS? If one half > is worn, the other will be just as bad. Makes some type of sense doesn't > it? > > > Route 66 Rider! > Ramon Hill > Live Long and Be Free > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > mordo > Sent: Monday, June 04, 2007 10:49 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Front wheel bearings > > The driver side front wheel bearing has gone bad after maybe 1500 miles. > The > swap was done by a local, un-tried mechanic. We did not replace races. Is > it > considered necessary to replace the races with the bearings or is it just > a > good practice? > > > > -- > mordo > 1990 Carat > > > > -- > mordo > 1990 Carat >

-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" www.crescentbeachguitar.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.