The bracket for the lower ends of the rear brake shoes are part of the backing plate assembly. The slotted pins come out but the bracket stays. Mark eric luebbers wrote: > Hello list, > > Since my motor and fuel tank are out I have decided to some brake work while waiting for parts. How does the bracket for the lower mounting inserts come off? I removed the two bolts but it does not want to come apart. I see that there is another hole below the two bolts is this a pin that can be removed? I do not want to pry on the back plate for fear of bending it. I started soaking it with pb blaster and tapping lightly but it still will not move. Any other ideas will be welcomed. > > Thanks > Eric Luebbers > 91 syncro > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.