Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2007, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 11 Jun 2007 05:48:26 -0700
Reply-To:     David Jensen <svhopalong@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Jensen <svhopalong@GMAIL.COM>
Subject:      how to pull pilot bearing on 86 Vanagon?
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I am doing my first-ever clutch replacement on my 86 Vanagon. First for me, not for the van. I have run into a bit of a roadblock on the pilot bearing. Does the flywheel have to come off to pull it? I have rented a pilot bearing puller, but it doesn't seem to want to grab the lip of the bearing. It could be that it is too large, although it slips through the bearing fine. Any suggestions would be very helpful. Thanks. David


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.