Here's my write-up, way back when, about this whole process: http://www.type2.com/archive/type2/031996.html From: "Craig Morton" <rangermorton1972@YAHOO.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, June 15, 2007 7:46 PM Subject: Drive Flange Oil Seal replacement
>I am trying to replace a leaking drive flange oil seal. I figured the two >hurdles were getting the circlip off and getting the drive flange off its >splined shaft. Both those operations went reasonably well and I thought I >was down to an easy seal removal, parts cleanup, new seal replacement and >then bolting it all back together. It was not to be. The old seal will not >budge. The Bentley calls for a VW 681 seal removal tool. I have a Stanley >screwdriver, some Craftsmen pliers, a hammer and my secret weapon ..... a >spike with the end bent to a 90 degree angle. Well, none of the above tools >has proven adequate. So is there a mechanic or a maniac out there with the >correct backyard method of removing this stubborn seal? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.