Interested in opinions on this -- am I thinking the problem right? Have a 90 GL which had a whiney fuel pump. Went to pull it apart this morning and when I disconnected the tank side of the pump didn't get the flow of fuel I'd expect -- even after opening the gas cap. Fuel color is clear with no bits. If the line from the tank is horizonal, I get nothing. If the line is pushed vertical I get a slow stream (about 1/4 the diameter of the line). As a test, I pumped air backwards through the line into the tank (and could hear the bubbles in the tank), but no change at all. Am I thinking about this wrong? Shouldn't I get a solid flow from that line? Suspicion would be an obstruction in the tank... If anyone can email me or call (757-621-6230) about this, I'd like to know before I put it back together. john |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.