In a message dated 6/18/07 9:52:40 PM Eastern Daylight Time, rbm1024@NETSCAPE.NET writes:
> Would any list members who have had this type of wheel bored out to 65.5mm > (2.618 inches) for a 2WD vanagon please contact me by pmail. I am concerned > about the amount of metal that would be removed when these wheels are bored. > Details of how your wheels were bored - straight, tapered, whatever - are > appreciated. Has anyone had a problem with modified wheels cracking or > otherwise failing in a way that might indicate that too much metal was > removed when the wheels were bored out? > > Thanks > > BTDT search the archives..this same question gets posted at least once a month.. machine the centers out to 2.5" dia and have ur machine shope machine them so the carat centercap will work. and no they wont break from that little bit machined off chris
************************************** See what's free at http://www.aol.com. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.