Did you have the mixture set with an exhaust gas analyzer? I had the same symptoms as you're describing, slight misfire around 2500, then ok above that. Failed smog, replaced cat and had the mixture set (not just the idle air screw, the AFM wiper arm too) and no more misfire. Of course this could be many things. But I mention this because I watched them set the mixture by revving the engine to around 2500-3000 rpm, and I could hear it even out as the mixture got closer. YMMV. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.