Date:         Wed, 20 Jun 2007 18:22:14 -0400
Reply-To:     Chris Lisica <wavanagon@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris Lisica <wavanagon@GMAIL.COM>
Subject:      Re: Solar panels for your Vanagon
Comments: To: Loren Busch <starwagen@gmail.com>
In-Reply-To:  <86476e250706191432s2bc6ee0p8b5cd55836aee43f@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Loren, if you are in the Seattle area, there has to be a marine store that
has something similar to what you were looking for. That sounds an awful lot
like something that may be used in a marine application (pleasure or
industrial engine room). I'd go to Ballard, check out some of the
shipyards/fisherman supply stores down there. Just a thought. Good luck w/
your future Sorbothane buying!

Chris

On 6/19/07, Loren Busch <starwagen@gmail.com> wrote:
>
> On 6/19/07, neil <musomuso@gmail.com> wrote:
> >
> >  I just Wikipedia'd "Sorbothane"
> > Where do you plan on applying (spraying?) this material in conjunction
> > with Norcold install?
>
>
> Sorbothane is a solid material, not sprayed on.  It is used primarily for
> vibration damping.  When I mount  the Norcold I'll use pieces of it where
> the 'fridge comes in contact with anything so that the vibrations from the
> compressor will be isolated from the cabinets.  This should minimize
> noise.
>



--
Chris
88 Vanagon GL
02 Golf GLS TDI (SOLD, looking for a Westy, now that I know what I really
like to drive)