Date:         Fri, 15 Jun 2007 14:19:31 -0700
Reply-To:     Steven Smith <kewsps@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Smith <kewsps@YAHOO.COM>
Subject:      Re: Catastrophic failure of coolant level sensor
In-Reply-To:  <d6594200767c40673be736e64fc06a9f@comcast.net>
Content-Type: text/plain; charset=iso-8859-1

Thanks Keith,

  Looks like the broken ground at the guage was the problem all along. Don't know why I didn't find it sooner.

  The real story is the faulty replacement coolant level sensor that  failed like a bottle rocket, leaving the threads in the expansion tank.

  The replacement from the dealer looks Superior AND has the right O-ring seal. Had I paid more attention to the clearly smaller O-ring (which immediately leaked) and not tightened it more to stop the leak, perhaps it would not have broken, but I didn't tighten it that tight and when it still leaked I removed it and replaced the O-ring with the right one. . .  you get the idea.

  I really don't think it was an over tightening problem.

  Beware Bad Parts!

  Steven





Keith Ovregaard <kovregaard@COMCAST.NET> wrote:
  Seems to me that my 84 had the same blinky light syndrome several years
ago. I scoured my repair log and could not find the info, but I believe
I had swapped instrument clusters with a known working one. It worked,
so I knew it was something in the instrument circuit. I did replace the
light/gauge, but I also remember putting a new voltage regulator in
there, too (the one in the instrument cluster, not the one on the
alternator). Sorry if that's too vague...


Keith O.
90 Westy Syncro "VikingWagen"
Past VeeDubs in the family
1984 Westy "Brownie"
1980 PU diesel
1978 Rabbit diesel
1979 Rabbit gasser
1963? 23 window Splitty
1965 Bus
1969 Bus
1959 Bug



---------------------------------
Now that's room service! Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.