You might try bendable 1/4" copper from the lumberyard if you're looking for an ID that fits on the existing grill. If you want smooth bends pick up a 1/4" tubing bender - they're cheap. On 6/21/07, Loren Busch <starwagen@gmail.com> wrote: > > RE: Worth trying! Will brass stand up to burner heat with the weight of a > small saucepan on it? > > Don't know but it's easy enough to stop at the local hobby store for the > brass tubing and give it a try. I do know that the VW logo inserts glow > dull red so there is plenty of heat there. >
-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" www.crescentbeachguitar.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.