> > There is nothing wrong with R134a - if you have a system built for it. > But old Freon systems converted to the higher pressures of R134a can be > problematic. And I don't want problematic in the dog days of summer. >
Okay, so what get's change in the R134a conversion apart from the fill fitting and seals? What allows it to operate at higher pressures? Seals? After sitting over-winter last year, mine was blowing lukecool. I put one 12oz can of 134a in with leak seal and oil included. It got the system pretty darn chilly even at the front vents. I would estimate 50F on a 80F day. I would have put more refrigerant in but I don't know what pressure to fill it to or how to know when it's done with no sight glass to look for bubbles in. cheers,
-- mordo 1990 Carat |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.