In a message dated 6/25/07 6:59:57 PM Eastern Daylight Time, paullist@GUZYK.COM writes:
> Another way is to leave the door panel intact, remove the power > window glass, (flip tab up or down in center of mirror between mirror > and outside case with something thin-see archives) then pull glass > away and unhook the two heater wires from the glass. > > Now remove motor assembly with 4 phillips screws. Pull out wires > from back of motor assembly (color coded). > > Now remove black motor mount base with smaller phillips screws. > > Then pull entire mirror away from body and carefully fish wires > through mirror base one by one starting with smallest wires first > ending with largest wires (pick tool helps here). > > --- > Installation is the reverse, note that when putting together fish > largest wires first through the holes. Don't forget to fish wires > through the rubber gasket before the mirrors....learned that one the > hard way. > thanks paul..but trying to feed the wires thru the mirror neck is far more difficult than removing the doorpanel..... lol chris
************************************** See what's free at http://www.aol.com. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.