Date:         Mon, 25 Jun 2007 19:40:07 -0700
Reply-To:     BA <oddstray@ODDSTRAY.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BA <oddstray@ODDSTRAY.COM>
Subject:      Re: Table leg modification
In-Reply-To:  <86476e250706250759g1349596bpb2952bf320788bef@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

We haven't yet found any cord grommets of the correct size (1-7/8",
iirc).  In the meantime, we bought a sink plug from the hardware store
to cover the hole (since we don't  use it for anything).


B&S
'87 Westy 'Esmerelda Blanc'
SoCal



On Mon, 25 Jun 2007 07:59:21 -0700, you wrote:

>>
>> The picture "Bottom End of Table Leg" shows a nylon insert in the end of
>> the table leg -- is it removed or kept?
>
>
>I left that plastic piece in.  If it were removed a larger diameter dowel
>could be used and might make a better fit.
>
>2. What's the diameter of the Guide Rod?
>
>Don't remember, I'd have to measure again myself
>
>>
>> 3. Photo "Problem Area.JPG" -- Loren, what happened there? I don't think
>> there were any mods done to that hole, were there?
>
>
>That's the area that chipped and prompted the insalation of the guide rod.
>
>BTW, I've given up trying to find a plastic ferrel or insert for that top
>hole.  I'd love to find something like the plastic inserts that are used in
>desks for the pass through for computer cables, etc.  that would fit.  That
>would cover the flaked of part and tighten the fit at the top a little
>better.  If anyone has any ideas let me know.