Date:         Fri, 29 Jun 2007 17:36:10 -0700
Reply-To:     David Kao <dtkao0205@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Kao <dtkao0205@YAHOO.COM>
Subject:      Re: exaust removal
Comments: To: craig cowan <phishman068@GMAIL.COM>
In-Reply-To:  <d1ea9acf0706291617t5720de26g3696da6a53532ee1@mail.gmail.com>
Content-Type: text/plain; charset=iso-8859-1

You are talking about the exhaust header of cylinder #1 and #3. This
is the front header and is quite easy to remove without removing a lot
of other stuff. This header connects the #1 and #3 across under the
transmission. It is really easy to remove. I just did it on my 83
westy a week ago.

David


--- craig cowan <phishman068@GMAIL.COM> wrote:

> I have installed a new muffler and tailpipe with new gaskets, but to
> no avail, as i still have a gaping leak at the #1 cylinder head. The
> gasket flaked off partially and has started it seems (as indicated by
> my mechanics) to erode the engine head. They feel that in order to
> replace said gasket, they will have to file down the head to get a
> flat surface but are concerned and perplexed by the idea of doing so
> without breaking any of the exaust manifolds. They believe that the
> pipes will have to be split at every joint they connect at in order to
> replace the exaust and that i'm opening up a few interesting issues
> involving rust.
>
> Is there a prefered method of removing a single exaust manifold port
> (or a single side) far enough to get a file in there and file the head
> slightly without having to remove the head studs and without having to
> break the entire exaust system. They told me it could be as much as 4
> hours of work ($75/hr!!!!).
>
> I sudgested the idea of getting a seperate complete exaust system,
> cutting the bolts with it out of the car and replacing them and the
> gaskets as needed to make the mechanics job much easier. Is this a
> good idea? If so.....whos got a spare 1.9L exaust system they wish to
> part with?
>
> -Craig
> '85GL
>




____________________________________________________________________________________
Pinpoint customers who are looking for what you sell.
http://searchmarketing.yahoo.com/