Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (July 2007, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 10 Jul 2007 19:42:04 -0700
Reply-To:     Jeffrey Vickers <jeff@VICKERSDESIGN.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeffrey Vickers <jeff@VICKERSDESIGN.COM>
Subject:      Re: Front end bushings
In-Reply-To:  <20070711023253.58E785B531E@vickersdesign.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Thanks, Dennis. I'm going to try the lower ball joint with a FLAP kit and I have a backup shop to do the press work if necessary. I wonder if any of the kits have a taper cone. This job will be a million laughs, I can already tell!

Jeff On Jul 10, 2007, at 7:23 PM, Automatic digest processor wrote:

> Date: Tue, 10 Jul 2007 22:12:51 -0400 > From: Dennis Haynes <d23haynes57@HOTMAIL.COM> > Subject: Re: Front end bushings > > Replacing the rack does not require any major front end > disassembly. Only > tie rod removal. The upper and lower bushings need a press or the OTC > c-clamp press with proper adapters. The lowers will also require a > taper > cone to squeeze the bushings into the arms. This part sucks. Get new > hardware-from VW, it is a fine pitch with prevailing torque > locknuts. The > lower ball joints will need a big press. At least 20 ton. > > Dennis


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.