I managed to take some minor and major dents out of some pushrod tubes by using a Gray brand 14mm socket and tapping it through the tubes. When I got to a dimple I would lightly tap on the dimple from the outside with a hammer and it would completely remove the dimple. It worked amazingly well even on some tubes that looked like they were beyond repair.
Pascal '84 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.