Date:         Tue, 17 Jul 2007 14:33:08 -0700
Reply-To:     TC <trclark@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         TC <trclark@SHAW.CA>
Subject:      Re: Read carefully
Content-type: text/plain; charset=iso-8859-1

Just FYI
This is reponse from CIP regarding the ss braided line C13-8810

It will handle 40 PSI with no problem, in fact according to them it will
handle a max 120 PSI. The key (if we did not know already) is the fittings.
Either the FI fittings should be on there or some AN fittings. That will do
the trick. It also fits nice and snug into the regulator! Hope this help, my
apologies for the delays in getting back to you.

Customer and Technical Service Representative with California Import Parts
Ltd.


> > I see this all the time as well.
> > It is $ thing I think.
> > People see less than $1 a foot versus $3.50 a foot and go for the
cheaper
> stuff not knowing the differences.
> > I have used braided stainless without issues also.
> so what do you guys think of this from empi (claims its good to 800 psi)
> $16us per 5'  ~ $3.2/ft and 1/4"  ~ 6mm should be tight enuff with a hose
> clamps ??
> http://www2.cip1.com/ProductDetails.asp?ProductCode=C13%2D8810
>
> http://www.cip1.ca/ProductDetails.asp?ProductCode=C13%2D8810