Date: Fri, 27 Jul 2007 12:47:49 -0700
Reply-To: Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Scott Daniel - Shazam <scottdaniel@TURBOVANS.COM>
Subject: Re: How Hot is To Hott?
In-Reply-To: <b45a982b0707271220s7614f12bmaa18763511a6f0fc@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"
Nice to see your comments.
( but before I forget, say more about this 'spanish inquistion' thing - I
don't get it yet .)
well, there are Lots of weaknesses in vanagon cooling systems.
Just fundamentally, with so many parts, spread from one end of the van to
the other......
A very challenged cooling system, in general.
Scott
www.turbovans.com
-----Original Message-----
From: Aristotle Sagan [mailto:killer.jupiter@gmail.com]
Sent: Friday, July 27, 2007 12:20 PM
To: Scott Daniel - Shazam
Subject: Re: How Hot is To Hott?
There is one weak link in the system.
The weak link to the system is the temp sender in the radiator. I went
through a couple in the 6 years I owned my 84. It is an easy
replacement part. Do it.
The second.. There are two, two weak links in the system.
The second weak link is the thermostat. I always ran without, no
matter what anyone said, the engine ran fin, got up to temp, etc. Be
aware, I live in san jose california. Not exactly Detroit for vaarying
weather conditions.
The third... There are three, three weak links in the system.
The third weak link is the water pump. Make sure your's isn't weaping.
Sure sign os a WP gone bad.
The fourth... There are four, four weak links in the system.
The fourth weak link is the pressure cap on the expansion bottle. This
bugger can cause wierder problems than any or all of the above. Make
sure yours is good.
And remember, No one expects the Spanish Inquisition.
tim in san jose
On 7/27/07, Scott Daniel - Shazam <scottdaniel@turbovans.com> wrote:
> That sounds just perfect for temp.
> And the 180 to 150 difference shows the radiator is doing what it should.
> And the rad fan coming on at low speed when it should - all sounds normal.
>
> It's the single contact sensor that operates the gauge.
> Trying another, or a new, temp gauge sender seems indicated to me.
> Or put a resistor in series to calibrate your gauge.
> Scott
> www.turbovans.com
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> craig cowan
> Sent: Friday, July 27, 2007 6:29 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: How Hot is To Hott?
>
> I just tested it with a Temp gun. The pipe going to the radiator (in the
> engine bay) is reading a consistant 180-185* with the heaters on (and with
> the heaters off it didnt seem to change) yet the temp guage is still
clearly
> "HOTTTT". The return water from the radiator is about 150* and the fan is
> working (at least on low).
>
> I recently replaced both temp sensors, could that be it? TEMP 1 is what
> works the guage isnt it?
>
> Any help is appreciated.
>
> -Craig
> '85GL
>
--
Where ever you are, there you be. Unless you're driving my van, in
which case, you ain't got there yet.