I know this has been answered many times on the Yahoo group, but I cannot reach that page due to my main computer crashing (text-based laptop is my only computer at the moment) ~so~ I am fully aware that I will need to do some drilling, and I am able to do that. One thing however, that bothered me is that I had to do some massaging of the passenger side engine mount (to clear the thermostat housing). Also, when using the existing holes in the frame (rear holes) do not line up whatsoever with any of the stock mount holes (Even when the mount is flipped backwards) Is the best course of action to drill new holes in the crossmember? Thanks in advance for not telling me to rtfm, or something along those lines. :D Sudhir |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.