> Speaking of changing out crimp connectors... What do you do about > wires that are cracking near the plastic connectors? I noticed that > several of my wires are becoming brittle and cracking near the ends. > With crimp connectors it's no problem, but how do you change the ones > that have the "snap on" end pieces? (all connectors are crimp on at some pt :) are you talking about the fi style connectors ? used on the temp2 ,injectors etc if so you can get 8 here for $15 http://www.msdignition.com/fuel_10.htm part#2400 or eagleday has some of the others http://eagleday.stores.yahoo.net/ampconnectors.html https://www.casperselectronics.com and you can always get em at the stealer |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.