Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2007, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 23 Jul 2007 21:56:42 -0400
Reply-To:     Mike Collum <collum@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Collum <collum@VERIZON.NET>
Subject:      Re: Dometic + related Electical Questions -- searched archives
Comments: To: neil N <musomuso@gmail.com>
In-Reply-To:  <c4e7c5f90707231847h234df5f7mcd0fd0bae1f003ee@mail.gmail.com>
Content-type: text/plain; charset=ISO-8859-1; format=flowed

welllll ... you can get a 15 or a 20. 15 is likely close enough for government work.

Mike

neil N wrote: > Hi Mike. > > Thanks. > > Problem is I can't find a 16 Amp fuse in that style. A problem I'd run > into before. > > Do they exsist? > > Quick google says "No". :^( > > On 7/23/07, Mike Collum <collum@verizon.net> wrote: >> You can get inline ATC fuse holders in various configurations. Here's >> one: >> >> http://cgi.ebay.com/ebaymotors/Ancor-Marine-Waterproof-Inline-ATC-Fuse-Holder-30A-Max_W0QQcmdZViewItemQQ_trksidZp3286Q2ec50Q2em20Q2el1116QQhashZitem290140057912QQitemZ290140057912 >> >> >> Mike >> >> >> >> neil N wrote: >> > Hi all. >> > >> > Re: my 81 Full Westy camper. I presume its a Canadian model. >> > >> > P. 97.32b in Bentley (middle RH side of page) shows a fuse, S6 10 >> > Amp, on refer. Not certain what it's for but It appears to fuse the >> > thermal switch for refer fan and 12V heating element via the fridge >> > relay. >> > >> > I have no red pilot LED. I have the meter gauge instead. There is a >> > stock knockout for fuse still in place above meter. >> > >> > Do I need this fuse? >> > >> > Since I have fridge out for servicing, I thought I'd ask. >> > >> > I will be putting in a 16 Amp fuse (S4) between aux. batt and >> > fridge/sink motor etc. ASAP >> > >> > (yes I am ashamed to say I've been running things without it) >> > >> > Anyone know if there's a stock inline fuse holder that will accept the >> > standard older type Euro fuse? Can't seem to find a 16 A fuse in any >> > other config. >> > >> > Many thanks, >> > >> > Neil. >> > -- >> > Neil Nicholson. 1981 Air Cooled Westfalia. >> > >> > http://web.mac.com/tubaneil >> > >> > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.