Bill, The Fox or a GTI is an improvement, but the best manifold you can get it off of an Audi 90 .... It has a dual outlet and angles to the front. This allows minimum back pressure, and allows you to make a gradual bend in the dual pipes. Bill MacLachlan wrote: >I'm thinking of replacing the diesel exhaust manifold/pipe on my I4 >conversion with the manifold/pipe from an Audi/VW Fox. > >Has anyone done this ? If so were there any issues ? ( other than bending a >new exhaust pipe - I'm expecting that! ) > >thanks all > >Bill M > >btw >thanks ato all who commented about the CV joint fastener tool....I found >one, have new driveshaft in place.... > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.