Date: Thu, 2 Aug 2007 10:13:54 -0400
Reply-To: Marla Stelk <mjstelk@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Marla Stelk <mjstelk@HOTMAIL.COM>
Subject: Re: 87 Westy High Idle
In-Reply-To: <001201c7d315$022d5dd0$0402a8c0@acerc28991bd48>
Content-Type: text/html; format=flowed
<html><div style='background-color:'><DIV class=RTE>
<P>Alasdair,</P>
<P>There are a lot of things that could affect your idle - I just went through this whole ordeal myself. First, check your idle stabilizer valve: turn on the ignition, but don't turn over the engine - you should hear/feel the ISV buzzing. You can also check the harness that plugs into it for continuity. If that is fine, check the ISCU - its behind the rear passenger side taillight. If its not the "B" version, you should replace it anyway. See if it looks burnt at all or if wiring for its harness is damaged at all. Check for continuity coming from it -all this info is in the Bentley. If the ISV and ISCU are okay, then look for air leaks - exhaust, etc. Check the oxygen sensor. Check your throttle valve - check for continuity and make sure the throttle is set properly. And finally, my problem ended up being a bad throttle
cable which wasn't apparent at first until it gradually got worse and my gas pedal started sticking in the acceleration mode. The first time I had this problem though it was the ISV, so start there. There is alot of information on this problem in the archives as well - its pretty common.</P>
<P>Good luck,</P>
<P>Marla</P>
<P>'87 Westy GL<BR><BR></P></DIV>
<DIV></DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #a0c6e5 2px solid; MARGIN-RIGHT: 0px"><FONT style="FONT-SIZE: 11px; FONT-FAMILY: tahoma,sans-serif">
<HR color=#a0c6e5 SIZE=1>
<DIV></DIV>From: <I>Alasdair Crawford <alasdair@VALLEYSOARING.ORG></I><BR>Reply-To: <I>alasdair@VALLEYSOARING.ORG</I><BR>To: <I>vanagon@GERRY.VANAGON.COM</I><BR>Subject: <I>87 Westy High Idle</I><BR>Date: <I>Mon, 30 Jul 2007 21:49:15 -0400</I><BR>>Last weekend my 87 Vanagon suddenly developed a 3600rpm idle! Found that if I disconneced the lead to the Idle controlvalve it imemdiately dropped back to normal 850rpm. Would this suggest a valve problem or does that mean something else feeding the ECU is telling it to request 3600rpm?<BR>><BR>>Trying to decide whether I should replace the valve (a $150 experiment) or just take it to the shop for real trouble shooting.<BR>><BR>>Thanks,<BR>>Alasdair Crawford<BR>>87 Westy<BR></FONT></BLOCKQUOTE></div><br clear=all><hr> <a
href="http://g.msn.com/8HMBENUS/2755??PS=47575" target="_top">Booking a flight? Know when to buy with airfare predictions on MSN Travel.</a> </html>
|