Date:         Tue, 7 Aug 2007 13:03:52 -0400
Reply-To:     Sudhir Desai <sudhir.desai@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Sudhir Desai <sudhir.desai@GMAIL.COM>
Subject:      Re: Installing a fuel pump
Comments: To: Jeff Lincoln <magikvw@gmail.com>
In-Reply-To:  <c803c1a70708070834m7e753c30rf475bcdd7b7ef45@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Those rubber standoffs can be found in the MSD Ignition catalog
(You'll have to do some fiddling [epoxy] to make them fit, but they
fit well)

Sudhir

On 8/7/07, Jeff Lincoln <magikvw@gmail.com> wrote:
> Sorry Bryan - I should have warned you about that bracket - it is a major
> PITA - I destroyed mine getting it off and now the pump is zip tied to the
> rframe - I guess I should replace that beacket someday.
>
> On 8/6/07, BJ Feddish <bfeddish@netreach.net> wrote:
> >
> > The new fuel pump and filter is in. I'm still picking dirt out from my
> > eyes.
> > Nobody warned me about that fuel filter bracket that is held on by 1mm of
> > dry rotted rubber on one side and a twist tie on the other where the
> > rubber
> > rotted off years ago.  Geez. :)  I "fixed" the old one but would love to
> > find a new replacement.  Anyway, the van seems to be running fine. The old
> > pump still had a "Re-Elect Reagan in '84" sticker on it so I believe it
> > was
> > quite old.*
> >
> > Thanks again,
> > Bryan
> >
> > * humor
> >
>
>
>
> --
> Thanks,
>
> Jeff
> 90' Carat (Grover)
> 86' (We call this one Parts)
> 85' GL (Preparing for reanimation)
>