removing the pins means you will need to pess fit the pin back into the piston as you try to reinstall the piston tuff do so. have the piston pin honed to make it a slip fit and then one less hassel as it goes back together Bob ----- Original Message ----- From: "Mike Collum" <collum@VERIZON.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, August 13, 2007 2:22 PM Subject: Re: To compress or to remove wrist pin - A Poll
> Removing the pistons and cylinders as a unit is preferable. In fact, I > once had a cylinder that wouldn't separate from the head no matter what > I tried (until I got it off the engine) and I opted to remove the piston > so I could reinstall it in the cylinder, and use a proper ring > compressor, THEN put the piston/cylinder back in as a unit. > > Removing them as a unit also lessens the possibility of breaking one or > more rings. Why open Pandora's box any further than it already is? > > Mike > > > > Brendan Slevin wrote: >> Alright, I have gotten a lot of wonderful help on my broken stud problem. >> I >> am now ready for the next step and need to know opinions on: >> >> A. Removing cylinders and pistons as one by removing the wrist pins >> or; >> B. Removing the cylinders, leaving the pistons and trying to finagle >> a >> band ring compressor on to reinstall the cylinders. >> >> I have good info on how to do both, I just want to know what you think! >> >> Thanks! >> >> >> Brendan >> I have measured out my life with coffee spoons. -T.S. Eliot >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.