Date:         Tue, 7 Aug 2007 21:06:49 -0700
Reply-To:     honemastert <honemastert@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         honemastert <honemastert@GMAIL.COM>
Subject:      Re: Atwood Furnace - Anyone have one?
Content-Type: text/plain; charset=ISO-8859-1

** Warren Chapman <vwsyncroguy@YAHOO.COM>  writes: **

> Has anyone installed one of these..... Atwood propane furnace

Mine was installed by the guys at GoWesty.   I'll take some
photos and toss them up on Flickr for everyone to see.

>
> Thinking of installing it into
> the small compartment between the fridge and the circuit breaker.

thats where mine is.

> It requires 20.5" of straight depth from outside wall of the van to
> interior cabinet face....probably a bit more than to the front of the
> cabinet face...so guessed I'll have to make a little frame around.  Also
> thinking of replacing that ugly front grate with something more
> attractive....or at least paint it grey to match the cabinets.

Mine's gray, they used another piece of board (material like
say the 'tables' are made out of?)  this takes up the extra depth.

when I get the photos up, I'll post a link for everyone.

 -tim

www.timschneider.org