Date:         Tue, 14 Aug 2007 11:45:28 -0600
Reply-To:     Don Spence <dkspence@TELUS.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don Spence <dkspence@TELUS.NET>
Subject:      Re: vanagon Digest - 13 Aug 2007 to 14 Aug 2007 - Special issue
              (#2007-890)
Comments: cc: jp.burdett@SPOTWAVE.COM
In-Reply-To:  <20070814170746.C6FB1M0DFJ@priv-edmwaa03.telusplanet.net>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Pry off the plastic plate in the centre. There is a phillips screw
under it. Put a little locktite on it and tighten it. Make sure the
window is rolled up and the crank is set to a position where it
doesn't bang your knee. Might want to double check with the window
down as well.

On 14-Aug-07, at 10:46 AM, Automatic digest processor wrote:

> Date:    Tue, 14 Aug 2007 00:55:08 -0400
> From:    "Burdett, Jean-Pierre" <jp.burdett@SPOTWAVE.COM>
> Subject: Window Crank loose and hanging?
>
> Anyone fixed these before? after driving on a rutted dirt road mine
> came
> loose and is just hanging  ...problem is I cant seem to get the crank
> off to see what holds it on?! Is it a snap fit or is there some
> magical
> screw / tensioner?
>
> Tha