Date:         Tue, 14 Aug 2007 14:17:40 -0700
Reply-To:     Joseph Fortino <fortino1@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joseph Fortino <fortino1@EARTHLINK.NET>
Subject:      Re: question about bad temp2 sensor
Comments: To: Jeff Lincoln <magikvw@GMAIL.COM>
Content-Type: text/plain; charset=UTF-8

Thanks, thats the word i was looking for * stumbling..*
just got a new one.. did you have a bit of a power loss on take off?

Joe

-----Original Message-----
>From: Jeff Lincoln <magikvw@GMAIL.COM>
>Sent: Aug 14, 2007 2:04 PM
>To: vanagon@GERRY.VANAGON.COM
>Subject: Re: question about bad temp2 sensor
>
>Joe,
>
>While I can't verify for sure that my issue was the Temp2 sensor I replaced
>mine and the symptoms went away (could be my wiring harness and unrelated).
>
>However I was having:
>
>*Poor running
>*Black smoke
>*rich running
>*terrible gas milage
>*stumbling
>
>It's a cheap and easy replacement if you think yours might be bad.
>
>
>On 8/14/07, Joseph Fortino <fortino1@earthlink.net> wrote:
>>
>> hello everyone,
>>
>> I have a question about a bad temp2 sensor, anyone give some feedback on
>> the issues
>> if you had a bad one.. i know it might trick the ecu to read wacky causing
>> some hot
>> running issues like stumble? yesterday it was 130 in the van.. woo hoo
>>
>> Thanks Much,
>> Joe
>>
>
>
>
>--
>Thanks,
>
>Jeff
>90' Carat (Grover)
>86' (We call this one Parts)
>85' GL (Preparing for reanimation)