At 01:15 AM 8/21/2007, David Kao wrote... >Try to turn the idle adjustment screw CCW half a turn to one or two >turns. This should make some improvement for the idle. If the idle >becomes >too fast then turn it back half a turn. Usually this will improve >horse power quite a bit. I've seen this claim a few times. Why would that be the case? Isn't the idle screw simply an air bypass in the throttle body? How does changing the small amount of air which is allowed to bypass a closed throttle plate have any significant effect on the amount of air which flows when the throttle is fully open? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.