Mine has a c-ring inside covered by another ring outside. Tapped off the outer ring with a 1/2" deep socket, and took off inner c-clip with pliers. Martin On 8/18/07, Rob <becida@comcast.net> wrote: > > At 8/18/2007 08:12 PM,Martin Jagersand wrote: > > > >7. To get at the middle bushing remove the ring and c-clip in front of > the > >gear. Slide off gear assembly. Take out plate holding middle bushing. > >Replace if worn. > > Hello Martin, > > How do you get at the c-clip? > > I have a 2.1 starter that I (from time to time) try to get that > c-clip off. It's very frustrating. > Maybe the diesel starter is that different from the 2.1 starter? > Maybe it's just me? At any rate I'd love to get that gear off my spare > starter. > Thanks for the write up, it's a keeper. > > > > Rob > becida@comcast.net > > With a '91 Subaru 2.2 in an '87 Vanagon in western Washington. > >
-- Martin Jagersand University of Alberta http://www.cs.ualberta.ca/~jag/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.