On 8/20/07, Kim Springer <kimspringer@rcn.com> wrote: > > I recently got the AC runnig in my truck and think I need to step up the > idle for the extra load of the AC compressor. The engine has stalled a few > times and the rpm takes too long to stabilize off revs. > > I haven't looked at the Bently wiring diagrams, but I would guess that > there is a contact on the Idle Control Relay to do this. I would also guess > that it's just a matter of running an extension from the clutch wire to the > relay. > > Anyone done this? > > Thanks, > > Kim > 88 Tristar #7
Not sure what engine management system you have but I thought the Digifant ECU did all the idle compensatiing for the AC and PS. True or false?
BenT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.