Loren, I installed mine with the curved cover plate facing up on the closest to center sidewall of the underseat compartment. This places the terminals at the side if the device. Unless you store loose tools under there it shouldn't be a problem. BTW I found two perfectly spaced pre-drilled holes on that sidewall to mount the 1315 using machine screws. I can send you a pic of the installation if my description was inadequate. Good luck, John Meeks Vanagon Rescue Squad http://www.vanagonauts.com/Vanagon_Rescue_Squad74.htm '91 Multivan, '85 GL Northern Michigan KC8ZFN On 8/26/07, Loren Busch <starwagen@gmail.com> wrote: > This is a question for those of you that have installed a Surepower 1315 > battery seperator. Has anyone found a good way to cover/protect the > terminals on top where the two batteries connect? They are out in the open > and depending on where you mount the 1315 can be very exposed to being > shorted. So I'm wondering what solutions people have come up with to > protect those terminals. >
-- |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.