Date:         Sun, 26 Aug 2007 18:57:37 -0700
Reply-To:     GMac999 <gmac999@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         GMac999 <gmac999@YAHOO.COM>
Subject:      Re: Draining/refilling oil of the Vanagons transaxle?
Content-Type: text/plain; charset=iso-8859-1

It does work if you have the time.

I went to the local AP and picked up a suction gun.  Take the bottles
under
with me, open one at a time, suck the fluid into the gun and squirt
it into
the filler hole.

The gun holds about 1/2 quart at a time, so it goes pretty quick.  I
tried
one of the bottle mounted pumps.  It worked, but took too much work
to do
it.

GregM

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
Behalf Of
Mike S
Sent: Sunday, August 26, 2007 7:49 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Draining/refilling oil of the Vanagons transaxle?

At 05:44 PM 8/26/2007, THOMAS IN GEORGIA wrote...
>Gravity feed 90 weight oil? You're kidding right?

Works fine, better if you can raise the funnel higher.

BTW, 90 weight _gear oil_ is about the same viscosity as 40 weight
_engine_
oil. SAE J300 and J306 are the specifications. 90 gear oil is a
13.5-18.5
centistokes @ 100C. 40 weight motor oil is 12.5-16.3 centistokes @
100C.





____________________________________________________________________________________
Choose the right car based on your needs.  Check out Yahoo! Autos new Car Finder tool.
http://autos.yahoo.com/carfinder/