Date:         Thu, 30 Aug 2007 18:44:44 +0000
Reply-To:     rubatoguy@COMCAST.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Todd Last <rubatoguy@COMCAST.NET>
Subject:      Re: Measuring fuel pressure
Comments: To: Kenneth Lewis <kdlewis@NORTHSTATE.NET>

Is that a vacuum gauge in the background?

 -------------- Original message ----------------------
From: Kenneth Lewis <kdlewis@NORTHSTATE.NET>
> Tink,
> Here is how I did it on the 85GL:
> http://neksiwel.20m.com/cgi-bin/i/images/2gauges.jpg
> Cheap parts from the hardware store.
>
>
> On my current bus: http://neksiwel.20m.com/cgi-bin/i/images/fuelgauge.jpg
> Here I incorporated a cut-off valve. My intention was to help smooth out the
> pulses, hence cutting down on the gauge wearing out. Now I just leave it off
> unless I think there's a fuel problem.
>
> Ken Lewis
> http://neksiwel.20m.com/

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.