Correct! Here's a pic: http://www.benplace.com/pushrod/cyl_position.jpg If you don't already know, there is a mark on rim of dist. that indicates TDC of #1 cylinder. The mark on engine pulley should line up with "0" on your static timing scale when rotor lines up with mark on dist. Cheers, Neil. -- Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco" (Bustorius) Please send fav Vanagon/Westfalia links to me at: musomuso1963@hotmail.com
On 9/4/07, Mike Frost <wasserleaker@gmail.com> wrote: > Hi all, > > I am adjusting my timing and I just want to verify that I have the cylinder > locations correct in my 86 2.1L water cooled digifant Vanagon: > > > (front of van) > > 3 1 > > 4 2 > > (rear of van) > > So, when leaning over the engine thru the rear hatch, cylinder 1 is the > farthest from me on the right, right? > > Thanks, > > Mike > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.