At 07:59 AM 9/7/2007, Dennis Haynes wrote... >The gear is attached to the starter shaft with a one way or >overrunning >clutch. This is often referred to as a "Bendix". This prevents the >armature >from being over run and destroyed during the brief moment when the >engine >starts and the solenoid is released. Most likely it is bad. Just to be pedantic, but "Bendix" actually refers to the pinion engagement mechanism. The one way clutch is actually a "Sprag." Our VWs (along with most modern starters) combine both Bendix and Sprag mechanisms with solenoid assist for the pinion (which is called a "Dyer drive"). |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.