Date:         Mon, 3 Sep 2007 13:43:12 -0400
Reply-To:     John Meeks <vanagon@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Meeks <vanagon@GMAIL.COM>
Subject:      Re: It's time to hit that idle Stabilizer on the head!!!
Comments: To: "T.M." <tinkerman007@yahoo.com>
In-Reply-To:  <vanagon%2007090309390185@GERRY.VANAGON.COM>
Content-Type: text/plain; charset=ISO-8859-1

On 9/3/07, T.M. <tinkerman007@yahoo.com> wrote:
> On Mon, 3 Sep 2007 02:00:52 -0400, Tinkerman007 <tinkerman007@YAHOO.COM>
> wrote:
>
> >Then I also took many close-up pictures so I could later continue to
> >analyze the circuit and even decode the circuit diagram...
>
> >This is only the beginning, because I can provide my photos to the list
> >for a joint effort of reverse engineering project to get the schematic so
> >we can easily repair these expensive units (remember, 350$...ouch!).
>
> Folks, when I say photos I mean REAL CLOSE-UP PHOTOS where you can zoom
> down to the level of a thin track or read a miniature resistor's value, on
> both sides of both boards...:-) at the convenience of your PC, not inside
> the van at a dark night...and with the power of about 1000 list members,
> surely there would be a few knowledgeable ones that could help too.
>
>
> But first, I need a place to put the files. Maybe on Gerry.vanagon.com?
>

Tinkerman
The best place to share your research and get collaborative input is
the Vanagon Wiki. Go to http://www.vanagonwiki.net and set up a user
account. Upload your files and make a page. Other users can add to the
article so  we will all have the info to use. This is the best place
to aggregate this kind of info and experience. Pmail if ??s
--
John Meeks

Vanagon Rescue Squad
http://www.vanagonauts.com/Vanagon_Rescue_Squad74.htm

'91 Multivan, '85 GL
Northern Michigan
KC8ZFN