Date:         Sun, 9 Sep 2007 21:20:10 -0700
Reply-To:     Jim Arnott <jrasite@EONI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Arnott <jrasite@EONI.COM>
Subject:      Re: Carbon Fiber Top
Comments: To: Mark Keller <kelphoto@TELUS.NET>
In-Reply-To:  <46E4AA3E.5010201@telus.net>
Content-Type: text/plain; charset=US-ASCII; format=flowed

Where's the cost of renting the autoclave to cure it all?

Jim

On Sep 9, 2007, at 7:21 PM, Mark Keller wrote:

> Well I priced 50 in cloth at 37.50 a yard.  weight was 5.7 oz per ft
> sq.  Basic Van  is 15 x 6 feet, or 90 ft sq so this give us 10 yards
> approx or $375 for the cloth.  The wet out could be done at .75 oz per
> ft sq or 90 oz so a gallon of resin. at $100 or $150 for epoxy resin

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.