Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2007, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 15 Sep 2007 15:21:08 -0700
Reply-To:     Bob Donalds <donalds1@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Donalds <donalds1@VERIZON.NET>
Subject:      Re: ECU firmware location
Comments: To: tinker man <tinkerman007@GMAIL.COM>
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original

So let me get this right you are looking for the code programed into the chip I would have to dig around but I have that from all three ECUs digjet USA digijet Euro Digifant USA

wont do you much good they are complex and non transferable to one another the digifant program is massive and I susspect has some ODB 1 or 2 software that was never incorperated into the van

as I have said the Euro ECU works with the American digijet my understanding of the differance is that the fuel mapiing and mabe the timing is infuanced as well in my chassis dyno testing swaping out the Euro and USA repatedly showed 13 HP differnce gain in the Euro ECU I still have a few Euro ECUs I sell to Customers when they go to 2.1 engines in the digijet vans

Bob Donalds

----- Original Message ----- From: "tinker man" <tinkerman007@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, September 14, 2007 9:39 PM Subject: ECU firmware location

> Hi all, > > This is kinda getting in-depth into embedded systems design, but does > anybody know if the firmware for our ECU's (Digifant or Digijet) > resides completely on the 2732 EPROM or is part of it contained also > INSIDE the microcontroller itself? > The reason I'm asking this is because I suspect I have a fried > microcontroller (Intel 8049H) but if it's a custom version with > protected firmware inside, replacing it won't solve the problem. My > CPU reads: > MAF 8049H P A167 > 078801 > DSD8905V5 U > WBX82HSCH > (C) INTEL 1977 > > That WBX82HSCH stuff seems to hint it's a custom version > (WBX=WaterBoxer) with protected firmware, with some of the firmware > also outside in the external EPROM. > Any guru's out there? > > Cheers, > TM


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.