On 9/23/07, David Kao <dtkao0205@yahoo.com> wrote: > Try to measure each resistor on the PCB. They tend to change value because of > aging and heat. Pretty hard in my case, with close to 200 parts on the PCB, all affecting each other's measurements... I was also checking the capacitors, which are more problematic. The good news is that I might get a spare unit for comparison and testing. I'll keep my fingers crossed till I get it... Cheers, TM |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.