Date:         Sun, 30 Sep 2007 16:38:28 -0400
Reply-To:     Mike S <mikes@FLATSURFACE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike S <mikes@FLATSURFACE.COM>
Subject:      Re: Clutch Slave Cylinder
Comments: To: Roger Sisler <rogersisler2000@YAHOO.COM>
In-Reply-To:  <vanagon%2007093014251330@GERRY.VANAGON.COM>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 02:15 PM 9/30/2007, Roger Sisler wrote...
>Get the master and slave at the same time. About $110. Dont change the
>rubber hose that runs from the master cyl resivour. Brake fluid will
>eat
>away at most rubber replacements.

CIP1 carries the correct (blue) brake fluid hose:
http://www2.cip1.com/ProductDetails.asp?ProductCode=VHD%2DN20%2D3501

Sold by the meter. You need about 700mm.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.