Date:         Sun, 30 Sep 2007 05:54:07 EDT
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: WTB 1.9 thermostat housing
Comments: cc: trclark@SHAW.CA
Content-Type: text/plain; charset="US-ASCII"

In a message dated 29/09/2007 12:47:40 P.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

Ah Fall  brakes, thermostat and another cv joint on its way :)
I am about to try and  get my thermostat replaced but feels like the bolts
are not my friend
I  think I might destroy the housing in the process anybody have a  good
housing for 1.9 they want to sell ?





TC, the long bolts will  most likely break off.  They must be drilled out and
the threads chased and  or helicoiled.  I have one very good, completely
overhauled, cleaned of all  corrosion, all threaded holes are good, with stainless
steel hardware ready  to go.  $100 plus your old one, plus $15 S&H.  If you
cannot  get yours off the water pump either send it with the water pump or cut
off  the pump with a hack saw without damaging the thermostat housing.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (_Collection for sale_
(http://members.aol.com/Fkc43/trainsal.htm) )
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
- Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Vanagon Stainless Steel Exhaust  Systems_
(http://members.aol.com/Fkc43/stebro.htm)
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 07 ~ 10,  2007