Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2007, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 2 Oct 2007 20:06:40 -0400
Reply-To:     pdooley <psdooley@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         pdooley <psdooley@VERIZON.NET>
Subject:      Re: MIG welding.
In-Reply-To:  <000c01c804a3$2a759b30$0201a8c0@MASTERPC>
Content-type: text/plain; charset=us-ascii


While I value everything Dennis contributes to this list, I would have to
disagree with the 110V argument.


I have been using a Lincoln Weld-Pac 100 for years and I can say thru
experience it will do whatever you need.
It will easily weld 1/4 inch plate and even thicker if you make multiple
passes.


I built a 15 foot utility trailer with this unit and never had a problem.
This includes multiple loads of cement blocks and ceramic tiles well over
2000 lbs.
I also built the load bar for my I4 engine swap in my Vanagon.  Again, no
problems.


The wire speed is adjustable from crawling to flying and the highest heat
setting if more than most people will ever need.


My unit came from Home Depot.


Just my experience..




-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Dennis Haynes
Sent: Monday, October 01, 2007 11:20 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: MIG welding.


A mig welder does make things a lot easier. Avoid the 110v units. They
can't develop the "open circuit" voltage and still deliver current to give
good penetration. Flux core wire is better for dirty welding. Gas is the
way to go for nice clean welds on clean materials.


Dennis




-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
neil N
Sent: Monday, October 01, 2007 9:06 PM
To: vanagon@GERRY.VANAGON.COM
Subject: MIG welding.


Hi all.


I've been reading about welding. (Haynes publication) I'm interested
in trying my hand at welding up some parts for my Vanagon engine
conversion ( - VC - ) here at home. FWIW, from what I've read, MIG
welding seems more user friendly and appropriate for the average Joe.


Here's a great site with excellent images and what looks like really
useful info on MIG:


http://www.mig-welding.co.uk/


there's even a video of the guy laying down a bead. There is also car
restoration pics worth looking at.


Nice site.


Just thought I'd share.




Cheers,


Neil.


--
Neil Nicholson. 1981 Air Cooled Westfalia -
"Jaco"  (Bustorius)


http://web.mac.com/tubaneil


Please send fav Vanagon/Westfalia links to me at:
musomuso1963@hotmail.com
Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.