Date:         Sun, 7 Oct 2007 17:47:14 -0400
Reply-To:     Mike Collum <collum@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Collum <collum@VERIZON.NET>
Subject:      Helicoils with engine in place
Content-type: text/plain; charset=ISO-8859-1; format=flowed

Well, I just successfully installed helicoils in both the exhaust
mounting holes for #1 cylinder with the engine in place.

I cut a couple of pieces of 2X2 wood and drilled them for the drill bit
   and for the tap.  placing them flat against the exhaust port, they
worked as a drill guide and a tap guide.  Of course, I had to use a
right angle drill chuck attachment.

I just can't imagine trying to do a good job without some sort of drill
guide.

Mike
'85 GL Westy (and others)

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.