Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2007, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 7 Oct 2007 23:32:56 -0400
Reply-To:     Benny boy <huotb@VIDEOTRON.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Benny boy <huotb@VIDEOTRON.CA>
Subject:      Re: Coolant tank cracks -- how quickly do they form?
Comments: To: John Runberg <jrunberg@MAC.COM>

The 1.9L as larger nipple! maybe it's a 1.9L?

Those thank (i assume you are speaking about the expansion tank) are easily available at the dealer, they are 5 time better than any after market one... lately, i have a lot of problems with after market one... the good news, VW as them and for a better price! yea, that is righ!

EX tank have a very big role on our van, buy the good stuff!

That infamous crack is a classic... they all crack at the same spot, the after market one crack at the seam/junction. Some even inflate as big as a soccer ball.

i forgot to publish that page on my site... well, like many other page just sleeping on my computer:

http://www.benplace.com/vw_expansion_tank.htm

Cheers, Ben http://www.benplace.com/vw2.htm

On Sun, 7 Oct 2007 16:23:27 -0700, John Runberg <jrunberg@MAC.COM> wrote:

>We've been slowly returning (read: replace everything that's worn and never been touched :) a '90 GL to the road and started to replace the coolant tank this weekend. Would have it finished if the right part was given to me... > >Anyway -- the PO had complained that nobody could ever get the cooling system correct, and he'd start to see that cheery blinking light before getting towed home. So here's the question: when I removed the coolant tank there was the crack I expected at the seam, but also it was cracked on top near the cap. The crack at the seam is new (or wasn't seeping before) -- I'm curious if the other crack could have been there for awhile... thoughts? > >Oh, here's another question: the tank I removed is part# 025 121 407A while the replacement tank a friend delivered from his shop is 100 121 035. It's obviously not the right part (top hose nipple is way too large), but I'm curious what it's really for. Any ideas? > >john


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.